eSeries by Telecor

eSeries is the foundation you need for daily and emergency communication. It is ethernet-based, easy to install, efficient in power usage, and expandable. Devices simply plug into the Power Over Ethernet network drop and each endpoint communicates directly without an intermediate device or server.

• Flexible
• No Head-End
• Cost Effective
• Easy Installation
• Simple Expansion
• No DHCP Server Required
• No Central Point of Failure
• Just Plug-It-In Design
• Third Party Integration

Take the Hybrid Approach

Whether your facility chooses to be fully ethernet-based or use a hybrid migration from your current analog environment, be confident you are securing the best in public address, intercom, emergency messaging, clock and time management.

Network & Connectivity

High-definition audio ensures crystal clear public address and outstanding music broadcast quality. Peer-to-peer technology provides practically an unlimited number of speech channels with unrestricted access to any device on the system.

Crystal clear HD Audio™ Speech Quality

• Frequency range from 50 Hz to 7 kHz
• Uses only 256 kbps of bandwidth per Intercom Call or 128 kbps per page
• Better Intelligibility then many digital paging systems

Extremely Low Latency

• Low-latency audio typically
• Exceptional performance during Paging, Intercom and Live Audio Playback

Extremely Fast All-Station Audio Connect Times

• Typically an all call to 500 stations is connected in 0.01 of a second

Non-Blocking Audio Between Stations & Consoles via LAN

• Each audio communication automatically assign it’s own independent audio “channel”
• Due to low bandwidth requirements, a typical network can support hundreds of channels at the same time
• Non-blocking audio virtually eliminates unnecessary busy signals

Dynamically Divisable

No Single Point of Failure

• System automatically re-configures itself to work with available devices
• If the primary, secondary, and backup call-in destination of an eStation is unreachable, the eStation will seek out a valid call destination
• e300 eConsoles are favored over 2 and 3 Button eStations
• eStation will still flash its status LED and sound an error tone once an hour to indicate loss of pre-programmed destination

For example:

• Classroom device programmed to call eConsole 1
• Network becomes subdivided due to a failure
• Classroom looks for the next available device; in this example, this is eConsole 2
• If eConsole 2 fails, classroom looks for the next available device again; in this example, this is the 2 Button eStation

Master Station- e300 Console

• Initiates pages, audio program distribution or easily establish two-way communication with any classroom.
• Two-line twenty-character backlit LCD screen displays incoming and outgoing call information
• Private or hands free communication available
• Feature keys allow user to scroll through a list of calls, select a paging zone or select a source for audio distribution to a selected area.
• Forward & transfer calls to other eConsoles

• Quickly create a selected rooms group
• Control keys with status lights
• Access up to four different Program sources, sixteen different digital audio files and tones
• Last call dialed and other features for easy operation.
• Paging microphone connection (MCC-PM-MA)
• Connects directly to an Ethernet PoE switch port